I am indebted to Nobuhito “Nobby”
Ohkawa --大川信仁 -- for helping
to preserve the early history of Japanese surfing, making it more widely known throughout
the world, and allowing me to draw from his research.[1]
Nobby’s website is a cultural
resource for learning about Japanese body boarding, the boards that were used
and the locations where it was practiced. I encourage you to visit the website
at: http://www.nobbywoodsurfboards.com/20.html.
It is rich with images as well as text both in English and in Japanese.
This chapter in the LEGENDARY
SURFERS series is a follow-up to my original posting made in July 2012 at: http://www.legendarysurfers.com/2012/07/early-japanese-surf-history.html
Certain beaches in Japan have a
tradition of body boarding that’s nearly two hundred years old and possibly a
little older.
From the mid-Edo Period [aka
Tokugawa Period, 1603-1867], Japanese style wooden boats were crafted due to
the then-new technology of timber processing. Previously, fishermen had used
canoes made by hollowing out and shaping logs.
Most Japanese-style milled wooden
boats had removable floor boards that were called Itago. When the boats
were beached after fishing, the children of the fishermen took the Itago
out of the boats and used them as kick boards and body boards. This practice
was commonly known as Itago-nori, meaning “Floor board riding.” It is
also called Itakko at Oiso Kanagawa, Setsukashi at Niijima Island
on the Izu island chain, Senoshi at Yamagata,
Northeastern Japan, and Sebuta at
Tokushima Shikoku. These different names -- such as “Itakko” or “Itago” – are
due to the different regional nomenclature.
The oldest written documentation
of Itago is the diary of Dokurakuan Kanri, a haiku poet who lived in
Sakata, in Yamagata Prefecture, Northeastern Japan.
He visited nearby Yunohama
Beach in 1821, where,
seeing children playing Senoshi, he wrote:
“Perhaps ten children of 12
or 13 are there,
taking the boat's planks they go,
embarking and diving into the racing sea,
further and further out they go,
then riding the waves they come back to shore,
fast, like an arrow, so many times they go.”
taking the boat's planks they go,
embarking and diving into the racing sea,
further and further out they go,
then riding the waves they come back to shore,
fast, like an arrow, so many times they go.”
In the 1880’s, bathing beaches
were opened up as locations for people’s health improvement. These beaches
gradually became public beaches that Japanese visited in their leisure time.
From this point on, Itago boards became more of a wave riding tool than a boat
floorboard and were widely made.
The boards were used as
lifesaving devices for fishermen and for wave riding by their children. The
dimensions of Itago were length: 60cm-to-120cm, width: 30cm-45cm, thickness: 2cm-3cm. Most of the boards were made of Japanese cedar, although
a few were made of Paulownia. In some cases, surfers even used old-fashioned
wood washboards as Itago substitutes.
Almost all Itago were flat
with no rocker and had a rectangular outline with a handle hole in the nose. However,
some surfers didn’t make a handle hole because they didn't like the water that
came out of the handle hole which hit them in the face when riding.
Itago were held vertically, a
riding style called Tate-nori, but, when taking off on a steep wave, it
was held horizontally -- a riding style called Yoko-nori.
After the 1890’s, Itago
riding skill improved with the growth of the Itago rider population. This
evolution prompted an Itago riding competition that was held at Oiso in July
1909.
Itago-nori became so popular at beaches that there was a
swimming instructional printed in 1914 that included descriptions of the Itago
and how to use it, along with drawings. “The Method of Swimming and Practice,”
by Ikuo Tsuzaki, noted, among other things, that “It’s easier
to ride on the wave with an ‘Itago’ than body surfing.”
Ten years later an
instructional solely devoted to Itago-nori was written in 1924 by Saburo
Sato.
As Itago-nori became
popular and widely used as a tool to assist with swimming, kickboarding and
bodyboarding, beach houses would rent them out to vacationers. The boards were
painted with the name of the beach house that rented the Itago or the name of
the company that supplied the boards.
World War II arrested
activity at all Japanese beaches, as it did all over the world. After the war, soldiers
in the American occupation army brought surf mats to Japan. Riding Itako changed to
surfing rubber mats at bathing beaches. After that, Itago almost completely disappeared
with the introduction of “boogie boards” in the late 1970’s.[2]
[1]
Ohkawa, Nobuhito “Nobby.” “Traditional
Surfing in Japan,
An Unknown History,” updated 10 May 2017.
[2]
In the late 1920s, a 9-foot Waikiki surfboard was brought to Chigasaki, Kanagawa, by
Shinjiro Mori. Around 1931, a hollow board was constructed that was much like a
big plywood bodyboard. It was called a “Float” and was made by Kamakura, Kanagawa shipwrights. See image at
Nobby’s website.
